|
RCC Front Coilover Kit for 88 Fieros (Page 1/1) |
|
fieroguru
|
NOV 09, 04:30 PM
|
|
This is a used kit I picked up used several years back and never put it to use. I am cleaning up the garage and wanting to free up some space for my winter projects...
The kit comes with:
- Lower shock mounts(lower a-arm needs to be cut to allow this part and shock to pass through it).
- QA1/Carrera shocks - they use a snap ring to support the coilover sleeve - these shocks are junk and need replaced, but are included so you know the dimensions and part #.
- Threaded sleeves to allow ride height adjustment
- 7 x 300 QA1 springs
- Upper spring perch spacers (allows the coil-over spring to center on the larger open hole in the front crossmember.
- Original RCC instructions
New this kit cost $495+ shipping in 2005 when it was purchased.
Asking $400 shipped in the US, but open to offers.
Here is the kit and what is for sale:
Here is a picture of the shock snap ring setup as well as the missing rod end bushing:
RCC Instructions:
Modification needed to lower a-arm (lower a-arms not included in this purchase):
How the lower shock mount installs in the lower control arm:
|
|
|
fieroguru
|
NOV 18, 09:52 PM
|
|
|
|
|