3800 bushing (Page 1/1)
longjonsilver FEB 26, 05:25 AM
i am trying to mate the 3800SC to a 4 speed transmission: Is there a bushing that would prevent my 4 speed transmission shaft from entering the 3800?
Dennis LaGrua MAR 01, 08:00 PM

quote
Originally posted by longjonsilver:

i am trying to mate the 3800SC to a 4 speed transmission: Is there a bushing that would prevent my 4 speed transmission shaft from entering the 3800?


Fiero transmissions do not use a pilot bushing. With a milled 3800 flywheel the trans should bolt right up.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

longjonsilver MAR 02, 05:14 AM

quote
Originally posted by Dennis LaGrua:
Fiero transmissions do not use a pilot bushing. With a milled 3800 flywheel the trans should bolt right up.



Thanks Dennis - it did finally.

jon

------------------
Astronomy says we will find a coded signal from outer space. Then we'll KNOW that life exists there, for coded signals aren't by chance.

Biology says there are coded genetic signals in every cell, but we KNOW that no intelligence created life.

I'm the original owner of a white ' 84 2M4 purchased Dec 10, 1983 from Pontiac. Always garaged, no rust, 4-wheel drifts are fun!