 
     |
| Alternator Bracket (Page 1/1) |
|
steve308
|
JUL 04, 06:05 PM
|
|
Can anyone direct me to a clear picture and or removal tutorial for the alternator bracket on a V6 (1986). I've removed every nut, bolt and wire. Alternator is loose but the bracket is blocking it from moving it to a hopefully removal area. I've removed both the upper and lower bolt from the bracket that I can see...is there a third bolt hidden? And yes the bracket snapped but I have a Rodney repair bracket brace on hand.
Happy 4th of July to all!
|
|
|
|
fierosound
|
JUL 04, 06:34 PM
|
|
|
|
|
steve308
|
JUL 04, 07:25 PM
|
|
|
Thank you. Looks like kidney stones will be kicked to number 2 on the list of things I hate.
|
|
|
|
Dennis LaGrua
|
JUL 04, 09:03 PM
|
|
| quote | Originally posted by steve308:
Thank you. Looks like kidney stones will be kicked to number 2 on the list of things I hate. |
|
One extra tip. If your alternator bracket is corroded it can break easily. The Fiero Store sells a replacement that is a bit stronger than the original. You may or may not need it but it is available.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
Dave E Bouy
|
JUL 04, 09:15 PM
|
|
| quote | Originally posted by steve308:
Thank you. Looks like kidney stones will be kicked to number 2 on the list of things I hate. |
|
LMAO
|
|
|
|
steve308
|
JUL 04, 10:21 PM
|
|
|
Yep..It snapped. I have the Rodney bracket metal plate gizmo so hopefully I can cobble it back together.
|
|
|
|
Dennis LaGrua
|
JUL 08, 04:10 AM
|
|
| quote | Originally posted by steve308:
Yep..It snapped. I have the Rodney bracket metal plate gizmo so hopefully I can cobble it back together. |
|
That's fairly typical. That bracket was not made very strong and years of flexing and corrosion can set in. The Rodney part is an Alternator Bracket Reinforcement Plate. If your alternator bracket has snapped the plate may not work. You probably need the new bracket that the Fiero store can supply. Good luck replacing the alternator. in an auto Fiero it is not a pleasant job, but you know this already. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
steve308
|
JUL 10, 08:40 PM
|
|
Now that the feeling has returned to my finger’s wrist and arms, I am happy to report that the alternator is installed and functioning. Thanks to all who contributed suggestions via the tech page and by PM. A special thanks goes out to a fellow FIERO owner and friend, Pat Jones, who came down on day two to wrestle the old one out and fight the new one into position. Friends helping out are what make putting up with these cars worth it. I also want to note that the Rodney Dickman alternator reinforcement bracket saved the day as the bracket did break when the original alternator was unbolted. (I also installed Rodney’s idler, another well engineered item).
Steve
|
|
|
|
