Performance suspension (Page 5/5) Blacktree APR 07, 01:34 PM I did a fair amount of autocrossing and drag racing, both with KYB and Koni dampers. IMO, the KYBs were inadequate for racing. The Konis were good, though. I was able to make the front suspension on my '87 Fiero adjustable for ride height. But it required modifying the suspension crossmember. Not for the feint of heart! You can read about it in my build thread: http://www.fiero.nl/forum/Forum3/HTML/000049.html Monkeybean007 APR 07, 05:25 PM quote Originally posted by olejoedad: The pre-88 front suspension has the shock mounted aft of the suspension. The 88 front suspension has the shock mounted inside the coil spring. I belive this means it's pre 88? Blacktree APR 07, 08:58 PM Yes, your front suspension is pre-88. Monkeybean007 APR 07, 09:24 PM K so then it has the front of an 85 and the rear of an 88 Blacktree APR 07, 09:30 PM That's actually the most desirable setup for racing. I had the same setup in my Fiero. Monkeybean007 APR 07, 10:03 PM quote Originally posted by Blacktree: That's actually the most desirable setup for racing. I had the same setup in my Fiero. Ya it handled super well I was pleasantly surprised