|
2.5 mystery part (Page 1/2) |
|
Lilchief
|
NOV 04, 10:36 AM
|
|
Working on my SD4, my machine shop says there's a bushing that goes on the oil pump shaft ( or could be the distributor don't remember which). Does anyone know of such a part ? Just need that and 2 bronze gears and it will be ready to put together.
|
|
|
fierosound
|
NOV 04, 11:21 AM
|
|
quote | Originally posted by Lilchief:
Working on my SD4, my machine shop says there's a bushing that goes on the oil pump shaft ( or could be the distributor don't remember which). Does anyone know of such a part ? Just need that and 2 bronze gears and it will be ready to put together. |
|
After looking in the SD4 guide (Page 19) that part appears to be part of the Super Duty Engine Build Package P/N 10031328 (Items #4 in diagram below) https://www.vpartsinc.com/O...-auto-parts/10031328
I didn't see an equivalent in the P22 Parts Book for the stock 2.5L Maybe someone else has more on that.
------------------ My World of Wheels Winners (Click on links below) 3.4L Supercharged 87 GT and Super Duty 4 Indy #163[This message has been edited by fierosound (edited 11-04-2019).]
|
|
|
edfiero
|
NOV 04, 01:22 PM
|
|
I have a couple of random parts left over from my 10031328 kit. I'll check to see if I have this one or not.
|
|
|
Lilchief
|
NOV 04, 04:08 PM
|
|
Thanks edfiero. I found one in England, very pricey.
|
|
|
fierosound
|
NOV 04, 11:31 PM
|
|
|
|
edfiero
|
NOV 05, 06:39 AM
|
|
Sorry Chief. Looked thru my parts last night, but that bushing was not among what I had left over. I'm running that Melling pump in my SD, mentioned by Fierosound, but I don't remember if I had to use that bushing or not. Perhaps it was already in the block when I got it. Good luck locating a cheaper one.[This message has been edited by edfiero (edited 11-05-2019).]
|
|
|
fierofool
|
NOV 05, 08:29 AM
|
|
PM legutt. I haven't seen him on here in a while but he's heavy into SD's. He may have what you need.
|
|
|
Lilchief
|
NOV 06, 12:41 PM
|
|
Thanks for looking Ed. Actually it was in Italy and they had it listed but don't have it. Sent a pm to legutt still waiting on a reply.
|
|
|
fierofool
|
NOV 06, 01:42 PM
|
|
I just talked to legutt and he has sold all his SD4's and parts. Didn't think he had such a bushing still lying around, but he suggested contacting The Fiero Factory. Said you never know what Ed Parks had put away. Jeremy may still have some stuff.
|
|
|
Lilchief
|
NOV 19, 05:44 PM
|
|
Just got back to Indiana and looked through my engine stash. I found my part on a 87 2.5 bare stock block. Apparently they're used in stock 2.5 engines( don't know about 88 and up ). Thanks to everyone for your help.
|
|
|