87 Fiero AC stays on (Page 3/3) TXGOOD OCT 09, 02:33 PM As far as your radiator fan turning on with the ignition that will happen if someone installed new switches on the AC compressor and grounded them, which is what the instructions tell you to do. I forgot, the last time I installed new switches and now my fan is on all of the time with the ignition on. I need to clip the ground wires going to them. svocal OCT 09, 11:55 PM Thanks for the info. I personally prefer to always have the fan on. quote Originally posted by TXGOOD: As far as your radiator fan turning on with the ignition that will happen if someone installed new switches on the AC compressor and grounded them, which is what the instructions tell you to do. I forgot, the last time I installed new switches and now my fan is on all of the time with the ignition on. I need to clip the ground wires going to them. svocal OCT 10, 12:06 AM The previous owner did some modification to the trunk area when building the replica. Note sure how to upload pics on this forum? quote Originally posted by da.slyboy: I think it would be interesting to post of picture of your front trunk area as I'm really confused on how the rad fan was blowing a very noticeable amount of cold air into the main cabin. Also wouldn't it start being warm air when the engine got to temp? Patrick OCT 10, 03:20 AM quote Originally posted by svocal: Note sure how to upload pics on this forum? If you're running a Windows PC, download and install PIP to host and post images here. Max width - 1024 pixels. Max file size - 300 kb. svocal OCT 11, 05:57 AM Here is the pic of the trunk area. As i mentioned the previous owner made some modifications to it. quote Originally posted by svocal: The previous owner did some modification to the trunk area when building the replica. Note sure how to upload pics on this forum?