So roughly a year and a half ago I completely disassembled the center console/radio/vents/gauges as I was changing the shifter, running new throttle cable, and other misc crap.
Fast forward to now and I can't remember how to put it back together.
Can anyone remind me the order things go back in? I know that plastic under skin is first, but I am lost after that...
Any help would be appreciated.
fierosound
JAN 14, 11:35 AM
Start at the bottom and work your way up.
Install Plastic Skeleton #38, and attach the side panels #27 with push fasteners #22. Then attach carpet along edge of Skeleton #38 and #27 panels with carpet clips #25. Install Reinforcement bracket #37 that holds the skeleton to the dash. Install A/C-Heater controls #30/40 Install Radio #42 (optional subwoofer would be under passenger side dash) Install Aux. Gauges 23/24/26 and connect wiring harness #39 (leave screws loose at this point for movement) Install Radio/Heater surround #28 - THEN tighten Aux Gauges cluster screws Install trim panel #28 Install Center Console/Glovebox/Cigarette Lighter on rear firewall. Install shifter surround and ashtrays.
