 
     |
| AC hose question (Page 1/1) |
|
cam-a-lot
|
APR 21, 07:51 AM
|
|
Hello
I have recently purchased an 88 GT with a 3800SC motor, that has a stock V6 Fiero air compressor on it. The previous owner (RULOOKIN) mentioned that he thinks he may have installed the AC hose backwards. I have not been under the car yet- so I don't have any pics. Is it possible to install it backwards? From what I recall, the AC hose going into the compressor has very different ends on it so it is not possible to hook up the wrong ends into the compressor, is it?
thanks
|
|
|
|
darbysan
|
APR 21, 10:17 AM
|
|
|
Hose would only fit one way.
|
|
|
Raydar
|
APR 21, 10:46 AM
|
|
| quote | Originally posted by darbysan:
Hose would only fit one way. |
|
This.
|
|
|
|
cam-a-lot
|
APR 21, 07:42 PM
|
|
|
|
|
olejoedad
|
APR 21, 08:54 PM
|
|
It is possible to cross the lines and hook up chassis connection backwards.
It would not seal, but would tighten down.
The lines should be parallel to each other, not crossed.
|
|
|
|
cam-a-lot
|
APR 22, 08:39 AM
|
|
Maybe that is what he meant. I will crawl underneath and look. So I should make sure the lines are not crossing each other from one end to another (twisting), correct?
|
|
|
|
olejoedad
|
APR 22, 10:06 AM
|
|
|
|
