|
fuel rail thread (Page 1/1) |
|
Eltsyrk
|
APR 15, 12:00 PM
|
|
i would like to put some flexible fuel line from tank to fuel rail on my car and was wondering if anyone knew the thread sizes of the fiero fuel rails ------------------ 1986 fiero se 2.8 v6 4 speed
|
|
|
DasCabbageMan
|
APR 16, 10:40 PM
|
|
quote | Originally posted by Eltsyrk:
i would like to put some flexible fuel line from tank to fuel rail on my car and was wondering if anyone knew the thread sizes of the fiero fuel rails
|
|
Do you have a haynes manual? I’m not sure about the thread sizes myself; but the haynes manual might be a good start. Although, the threads may be tapered, just like the brake system.
What’s the purpose of the change?
|
|
|
Eltsyrk
|
APR 17, 07:37 AM
|
|
quote | Originally posted by DasCabbageMan:
Do you have a haynes manual? I’m not sure about the thread sizes myself; but the haynes manual might be a good start. Although, the threads may be tapered, just like the brake system.
What’s the purpose of the change? |
|
my threads on the fuel lines themselves are gettting bad and probably should be replaced and i thought mine as well try to get some braided steel lines that look really nice instead of a 30+ year old fuel line with the coating comeing off if i cant get the thread size ill just pick up some stainless steel one from the fiero store got my engine all apart mine as well do it now------------------ 1986 fiero se 2.8 v6 4 speed
|
|
|
Dennis LaGrua
|
APR 20, 02:47 PM
|
|
You can buy AN adapter fittings for the fuel rail block. I've done it and used these SS braided/ AN fittings: Fitting, Straight, AN Flare to Metric, Aluminum, -6 AN to 16mm x 1.5 Male Fitting, Straight, AN Flare to Metric, Aluminum, -6 AN to 14mm x 1.5 O-Ring Adapter Fitting; Power Steering Adapter; Anodized; -6 AN Male To 5/8 in.-18 O-Ring Seal ( believe this fits the gas filter)
Don't quote me on the above but these are commonly used for fuel injection SS hose AN connections------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|