|
Restoring a rusty fuel tank. (Page 2/2) |
|
hercimer01
|
JAN 18, 11:12 PM
|
|
quote | Originally posted by pmbrunelle:
Saying something is works right after the repair is fairly useless, now saying that something works after two years is silver .
If you can come back and say the fuel pump/tank is still running without problems after three years, that's golden! You'll have made it past the basic warranty period... a bare minimum goal that auto designers strive to attain. |
|
No. I did have to replace the fuel pump about a year after, but it was under warranty.
|
|
|
Will
|
JAN 19, 02:57 PM
|
|
I guess the MEK didn't damage the surface the metal prep left.
|
|
|
hercimer01
|
FEB 11, 11:55 PM
|
|
quote | Originally posted by Will:
I guess the MEK didn't damage the surface the metal prep left. |
|
I guess not. I did it after the metal prep to get all the old chemical residues out. Plus if you don't use metal prep immediately after the muratic acid water, it will rust within 15 minutes. Also my thinking on the MEK was that it would remove any of the loose residues.[This message has been edited by hercimer01 (edited 02-11-2020).]
|
|
|
hercimer01
|
JUN 05, 05:34 PM
|
|
|
|
Mike in Sydney
|
JUN 05, 08:58 PM
|
|
I've used muriatic acid before and had good results. I like this electrolytic method. You just need a Battery Charger or 12 well charged 12 volt battery and a box or two of washing soda, not baking soda. I got great results on the inside. If you want to do the outside with this method, you'll need something big enough to submerge the tank in and a lot more washing soda. (You can also use this method to de-rust tools.)
https://www.instructables.c...A-Motorcycle-Gas-Ta/[This message has been edited by Mike in Sydney (edited 06-05-2021).]
|
|
|