|
3800sc . looking for clutch to flywheel bolts (Page 1/1) |
|
Scott2scott
|
FEB 05, 10:04 AM
|
|
i have the spec 3+ clutch set and got the 8 gm flywheel bolts orderd. but not really sure what bolts i need to mount clutch to flywheel?? can i reuse the stock ones? or GM 24571667? or GM 24501365 ? i think the last one is for auto trans. bolts. not really sure , any help would be great . thanks.
|
|
|
AutoMarshal
|
FEB 05, 03:01 PM
|
|
I got the clutch and flywheel bolts from the local GM dealership. Clutch bolts: part# 24571667 $2.60 each times 6= $15.60 Flywheel bolts: part# 24505092 $3.20 each times 8= $25.60
Torque specs: flywheel: 11 lb/ft + 50* (I like to use a bit of red thread lock on the bolts) clutch: 15 lb/ft + 45* (I like to use a bit of red thread lock on the bolts)
http://www.fiero.nl/forum/F...2/HTML/000156-4.html
|
|
|
Darth Fiero
|
FEB 05, 03:19 PM
|
|
quote | Originally posted by Scott2scott:
i have the spec 3+ clutch set and got the 8 gm flywheel bolts orderd. but not really sure what bolts i need to mount clutch to flywheel?? can i reuse the stock ones? or GM 24571667? or GM 24501365 ? i think the last one is for auto trans. bolts. not really sure , any help would be great . thanks. |
|
GM 24501365 bolts are for the auto trans flexplate to crankshaft bolts. THESE WILL BE TOO SHORT FOR A MANUAL TRANS FLYWHEEL - DO NOT USE.
You need 8x 24505092 bolts as AutoMarshal stated.
-ryan------------------ OVERKILL IS UNDERRATED Custom GM OBD1 & OBD2 Tuning | Engine Conversions & more | www.gmtuners.com
|
|
|
Scott2scott
|
FEB 05, 04:46 PM
|
|
I already have 8 24505092 that mount flywheel to motor . Im clear about that. It was clutch to flywheel bolts. Thats lloks like the other number he just gave is what im looking for. Thanks The 6
|
|
|
Larryinkc
|
FEB 05, 06:30 PM
|
|
Are you using the Spec aluminum flywheel?
|
|
|
Scott2scott
|
FEB 05, 09:46 PM
|
|
No. No a factory 1996 camero down .840 thick
|
|
|
Spalding1028
|
FEB 07, 01:18 AM
|
|
quote | Originally posted by Scott2scott:
No. No a factory 1996 camero down .840 thick |
|
Off topic, but did you have it balanced to the 3.8sc imbalance when you had it machined?[This message has been edited by Spalding1028 (edited 02-07-2015).]
|
|
|
can machine
|
APR 16, 07:26 PM
|
|
I went to order the clutch bolts GM P/N 24571667 and they are discontinued. Does anybody know of a suitable replacement or even what the specs are on them. ei: length, thread?
|
|
|