|
Printed circuit board (Page 1/1) |
|
ron768
|
NOV 18, 12:24 AM
|
|
So, got alot of work done on my car this weekend. Had to take apart the instrument panel to replace light bulbs and found the printed circuit board damaged. Does anyone know where to get a replacement other than another instrument panel? Failing that,,, anyone have a 86 instrument panel for sale?
|
|
|
Easy8
|
NOV 18, 08:12 PM
|
|
Shoot a pic of the board and send it to me. I picked up three of them a while ago. I need to make sure they are the same, since the ones I have came from a Canadian car.
|
|
|
freedom0226
|
NOV 19, 10:18 PM
|
|
Same here. i took mines apart to replace some bulbs and now all the lights on the left side do not work. the ajar light , temp, brake etc .
|
|
|
ron768
|
NOV 20, 01:12 AM
|
|
It will take me a few days to get to taking a pic of it. I put it all back together and I am driving the car. I will get to it saturday. Thank you
|
|
|
olejoedad
|
NOV 20, 07:49 AM
|
|
There is a part number on the laminated circuit. Be sure the replacement part has the same part number.
I only know of two possible part numbers for the item.
|
|
|
Easy8
|
NOV 20, 08:52 AM
|
|
Part number should work if you can get that. So looking at the three I have I get two of the 25077762 and one 250481147. Now I am going to have to tear the chop apart and see what I need. From what I can see there is only one contact different between the two, it is listed as oil pressure gauge. So were they different from the GT to the base car?
|
|
|
ron768
|
NOV 22, 12:56 PM
|
|
Mine has pn # 25077762. It from an 86 GT.
|
|
|