Auto trans selector indicator (Page 1/1)
fierofrenzy JUN 23, 07:19 AM
Ok, the auto trans selector indicator "thing".....or whatever its called. You know, that orange bar that moves up and down in your shift indicator telling you what gear your in. Mine is way out of wack. Sounds like it should be a simple fix, but I don't want to start breaking any kind of clips while pulling the console apart. Anybody got some tips on this one ?
theogre JUN 23, 11:43 AM
Pointer just slips on the shifter when install the console. No adjustment needed or possible. If doesn't move then console is installed wrong.

Paint on it or pointer can fade to white from sun light (UV). Can't fix it w/o breaking plastic light fixture.

Shift "knob" is attach to shifter w/ a clip you pull/push from front. Used wheel block so can shift to D etc to see it. then pull 4 screws under ash trays.

Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)

The Ogre's Fiero Cave

tshark JUN 23, 12:16 PM
Are you a member of the club down there? They have detailed info on this.
pcgold JUN 24, 11:27 AM
I had to fix mine. Simple. Take off the boot and plate, reposition the indicator and away you go.
johnyrottin JUL 01, 09:42 PM
Here is an old thread to show you how to freshen those up,
johnyrottin JUL 01, 09:48 PM
delete - duplicate

[This message has been edited by johnyrottin (edited 07-02-2018).]

tshark JUL 01, 11:08 PM
Good to see you're still here, Johnny!
fierofrenzy JUL 02, 06:28 AM
You guys did it again ! Thanks so much. I bet this is the best auto forum on the internet.
kendell JUL 05, 01:11 AM

Originally posted by johnyrottin:

Here is an old thread to show you how to freshen those up,

Pretty tips on that thread.