Indy Fiero #64 restoration (Page 2/3)
FieroMaster88 JUN 17, 11:32 PM
Finally got it home from it’s long term storage! Time to start working on it if I’m gonna make it to the 35th with it.




FieroMaster88 JUN 22, 10:11 PM
I installed a new battery this week to find it doesn’t run for more than 15 seconds at a time. Runs crappy for those 15 seconds. Decided to drain the gas out of the tank and add some new. Pretty nasty. Got it running a little better. Ordered a new fuel filter, tps, map and idle valve. Moved it into the garage tonight. Hope to start on the brakes and suspension this weekend.

Patrick JUN 22, 11:22 PM

quote
Originally posted by FieroMaster88:

Ok, so I had another thread for this but thanks to photobucket it’s ruined.



This one? What's wrong with it?

FieroMaster88 JUN 23, 01:23 PM

quote
Originally posted by Patrick:

This one? What's wrong with it?



The picture links were all broken. Appears fine now. At least it’s linked to this post now.

JohnWPB JUN 25, 07:22 PM

quote
Originally posted by FieroMaster88:


The picture links were all broken. Appears fine now. At least it’s linked to this post now.



I would grab all the photos from your original thread before they are gone forever. Who knows what PB is going to do.....

[This message has been edited by JohnWPB (edited 06-25-2018).]

Fiero Thomas JUN 25, 07:45 PM
Here is a video I took of this car when I owned it. Shows that she will run good

------------------
1987 Fiero GT T-Top
2012 Kia Forte Koup
2017 Kia Forte S

FieroNews
FieroNews Spare Tire Cover
FieroNews Windshield Banners
FieroNews Hoodies and T-Shirts

FieroMaster88 JUN 26, 09:33 PM
Oh I know it runs good. I’m taking the spare valve cover and air filter housing to work tomorrow for sand blasting and paint. Need to get going on this car so it makes it to the 35th.
Thunderstruck GT JUN 27, 08:53 AM
I have quite a bit of NOS striping in the boxes and I believe all the badging in NOS as well if you are looking for any.
FieroMaster88 JUN 27, 06:39 PM
Sand blasted and painted the air filter housing and valve cover today:




FieroMaster88 JUN 27, 08:52 PM
I also installed a new headlight switch and good used arm rests.




[This message has been edited by FieroMaster88 (edited 06-27-2018).]